MkWikiEnSysOp: 13 revisions imported

2018-06-28T17:19:38Z

13 revisions imported

New page

== Funktionen unter Ubuntu ==

WLAN Fn-Tasten Audio
10.04 NBR OK mit "acpi_osi=Linux": alle außer F7 und F9 OK
10.04 XUB OK mit "acpi_osi=Linux": alle außer F1 OK
10.10 OK Alle außer F2 und F3 OK
11.04 α1 OK nach Ab- und Anmelden: alle außer F2, F3, F7 OK
11.04 OK mit "acpi_osi=Linux": alle außer F1, F3, F7 und F9 OK
11.10 b2 OK mit "acpi_osi=Linux": alle außer F1, F2, F3, F4, F7 und F9 ?
12.10 OK alle außer F1 und F3 OK

[[File:Eeepc1005ha_ubuntu_fnkeys.png]]

Fn+F9 kann nachträglich konfiguriert werden.

[https://bugs.launchpad.net/ubuntu/+bug/864281 Bug in Ubuntu Launchpad]

== Ethernet ==

01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet [1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:838a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4182
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [6c] Vital Product Data
Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout+ NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180 v1] Device Serial Number ff-21-fa-8f-90-e6-ba-ff
Kernel driver in use: atl1c
Kernel modules: atl1c

== Mass Storage ==

=== Measurement Method ===

Writing zero-bytes to a temporary file:

<pre>
$ dd if=/dev/zero of=tempfile bs=1M count=1024 conv=fdatasync,notrunc
</pre>

First flushing caches, then reading file:

<pre>
$ echo 3 | tee /proc/sys/vm/drop_caches
$ dd if=tempfile of=/dev/null bs=1M count=1024
</pre>

=== /dev/loop0 (AES128-encrypted container on /dev/sda5) ===

This was used by me until Ubuntu 12.10 to encrypt my /home directory.

{| border="1"
|-
| Write || Read
|-
| 11.2 || 20.6
|}

=== /dev/sda7 ===

* Write

<pre>
# dd if=/dev/zero of=tempfile bs=1M count=512 conv=fdatasync,notrunc
512+0 records in
512+0 records out
536870912 bytes (537 MB) copied, 25,9133 s, 20,7 MB/s
</pre>

* Read

<pre>
# dd if=tempfile of=/dev/null bs=1M count=512
512+0 records in
512+0 records out
536870912 bytes (537 MB) copied, 25,3863 s, 21,1 MB/s
</pre>

=== /dev/sda5 ===

* Write

<pre>
$ dd if=/dev/zero of=tempfile bs=1M count=1024 conv=fdatasync,notrunc
1024+0 records in
1024+0 records out
1073741824 bytes (1,1 GB) copied, 35,6505 s, 30,1 MB/s
</pre>

* Read

<pre>
$ dd if=tempfile of=/dev/null bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1,1 GB) copied, 30,3147 s, 35,4 MB/s
</pre>

=== /dev/sdb1 ===

This is a 16 GiB Class 10 SD card in my Eee PC. Its purpose should be to save the operating system (Xubuntu 14.04) and it contains a swap partition.

* Write

<pre>
# dd if=/dev/zero of=tempfile bs=1M count=1024 conv=fdatasync,notrunc
1024+0 Datensätze ein
1024+0 Datensätze aus
1073741824 Bytes (1,1 GB) kopiert, 93,2682 s, 11,5 MB/s
</pre>

* Read

<pre>
# echo 3 | tee /proc/sys/vm/drop_caches
# dd if=tempfile of=/dev/null bs=1M count=1024
1024+0 Datensätze ein
1024+0 Datensätze aus
1073741824 Bytes (1,1 GB) kopiert, 57,2227 s, 18,8 MB/s
</pre>

[[Category:Computer]]
[[Category:Linux]]

Eee PC 1005HA - Revision history

MkWikiEnSysOp: 13 revisions imported